RubberGard™ EPDM Roofing Systems

RubberGard™ EPDM Roofing Systems

A Product That Stands the Test of Time

RubberGard EPDM Image

Since its introduction in 1980, Firestone’s RubberGard EPDM system has dominated the single-ply roofing market through its proven performance, durability and flexibility over a wide range of building types.

The RubberGard EPDM system has delivered more than three decades of commercial roofing success by building upon a heritage of innovation in rubber polymer technology. The versatile membrane offers a variety of installation options including fully adhered, ballasted or mechanically attached that deliver superior long-term weather ability and exhibit exceptional wind-uplift resistance.

Features and Benefits

Features:

Energy Savings

Lightweight Design For More Versatility

Longevity

Benefits:

This system’s thermal performance can reduce energy consumption. A 30-year adhered RubberGard EPDM roof system can reduce costs up to 25% than other roof systems.

RubberGard EPDM membrane weighs less than half a pound per square foot making it easier to handle and maneuver when installing and transporting.

RubberGard EPDM membrane can last up to 50 years and the cost to remediate and extend its life can be as little as 5% of the cost of a new roof.

Applications

Commercial

RubberGard EPDM Installation Image

Government

Hospitals and Universities

Complementary Products

Insulation

QuickSeam™ Accessories

RubberGard EPDM Solvent-Free Bonding Adhesive

Videos

RubberGard EPDM Large Hole Repair

RubberGard EPDM Wall Flashing

RubberGard EPDM Base Tie-in using Reinforced Perimeter Fastening Strip

Installing RubberGard EPDM Solvent-Free Bonding Adhesive

RubberGard EPDM Splice Tape Overlap

RubberGard EPDM Fully Adhered

RubberGard EPDM Drain

RubberGard EPDM Headlap T-Joint Patch

RubberGard EPDM Inside Corner

RubberGard EPDM Batten in the Seam

File Name Size Download
B-01 QuickSeam™ Batten Cover at “T” Perimeter 99 kB
B-02 QuickSeam™ Batten Cover at End Lap 96 kB
B-03 QuickSeam™ Batten Cover at Field Seam 104 kB
B-04 Fully Adhered Perimeter Tie-In Option 84 kB
B-05 Mechanically Attached Perimeter 98 kB
B-06 Perimeter Using R.M.A. Strip 94 kB
B-07 QuickSeam™ RMA Strip at “T” Permimeter 111 kB
B-08 QuickSeam™ Batten Cover 71 kB
BT-01 Base Tie-In with QuickSeam™ RPF and 2″ Metal Plates Fastened to Deck 111 kB
BT-02 Base Tie-In with QuickSeam™ RPF and 2″ Metal Plates Fastened to Wall/Curb 98 kB
BT-03 Base Tie-In with QuickSeam™ RPF and Batten Fastened to Deck 113 kB
BT-04 Base Tie-In with QuickSeam™ RPF and Batten Fastened to Wall/Curb 107 kB
BT-05 Base Tie-In with QuickSeam™ RPF and 2″ Metal Plates with Deck Obstruction 119 kB
BT-06 Base Tie-In with 2″ Metal Plates Fastened to Deck 113 kB
BT-07 Base Tie-In with 2″ Metal Plates Fastened to Wall/Curb 99 kB
BT-08 Base Tie-In with Batten Fastened to Deck 111 kB
BT-09 RubberGard EPDM Base Tie-In with Batten Fastened to Wall/Curb 107 kB
BT-10 Base Tie-In with 2″ Metal Plates – Deck Obstruction 113 kB
BT-11 RubberGard EPDM Base Tie-In at Curb/Parapet with Existing Cant 117 kB
BT-12 RubberGard EPDM Base Tie-In at Welded Watertight Curb (Flanges Under 2″) 118 kB
BT-13 RubberGard EPDM Base Tie-In at Welded Watertight Curb (Flanges 2″-3″) 124 kB
BT-14 QuickSeam™ RPF Layout at Outside Corner 254 kB
BT-15 Base Tie-In_QuickSeam™ RPF Layout at Inside Corner 247 kB
BT-16 Membrane Securement at Outside Corner 159 kB
BT-17 Membrane Securement at Inside Corner 155 kB
BT-18 Base Tie-In EPDM System to Existing EPDM System (Monolithic Substrate) 150 kB
BT-19 Base Tie-In EPDM System to Existing EPDM System (Non-Monolithic Substrate) 155 kB
BT-20 Base Tie-In EPDM System to Existing Thermoplastic System (Monolithic Substrate) 151 kB
BT-21 Tie-In EPDM System to Existing Thermoplastic System (Non-Monolithic Substrate) 153 kB
BT-22 RubberGard EPDM Base Tie-In EPDM System to Existing Asphalt System (Monolithic Substrate) 176 kB
BT-23 RubberGard EPDM Base Tie-In EPDM System to Existing Asphalt System (Non-Monolithic Substrate) 180 kB
BT-24 Base Tie-In with Metal Roof Deck 100 kB
C-01 Outside Corner with QuickSeam™ Corner Flashing 103 kB
C-01A Outside Corner with QuickSeam™ Corner Flashing Installation Steps 114 kB
C-02 Outside Corner at Welded Watertight Curb (Flanges Under 2″) 109 kB
C-02A Outside Corner at Welded Watertight Curb (Flanges Under 2″) Installation Steps 1 & 2 109 kB
C-02B Outside Corner at Welded Watertight Curb (Flanges Under 2″) Installation Steps 3 & 4 111 kB
C-03 Outside Corner at Welded Watertight Curb (Flanges 2″-3″) 106 kB
C-03A Outside Corner at Welded Watertight Curb (Flanges 2″-3″) Installation Steps 1 & 2 93 kB
C-03B Outside Corner at Welded Watertight Curb (Flanges 2″-3″) Installation Steps 1 & 2 115 kB
C-04 Inside Corner with 3″ Flap and QuickSeam™ Splice Tape 106 kB
C-04A Inside Corner with 3″ Flap and QuickSeam™ Splice Tape Installation Steps 118 kB
C-05 Inside Corner – Folded Membrane with Splice Adhesive and QuickSeam™ Splice Tape 128 kB
C-06 Inside Corner with Separate Wall Flashing 103 kB
C-07 QuickSeam™ Curb Flashing 101 kB
D-01 Roof Drain 155 kB
D-02 Overflow Roof Drain with Water Dam 127 kB
D-03 Firestone Drain Insert 174 kB
D-04 Roof Drain with Steep Slope Sump 139 kB
D-05 Roof Drain with Overflow Roof Drain 171 kB
E-01 Expansion Joint (Field Fabricated) with QuickSeam™ RPF Roof to Wall 140 kB
E-02 Expansion Joint (Field Fabricated) with QuickSeam™ Splice Tape – Roof to Wall 139 kB
E-03 Expansion Joint (Field Fabricated) with QuickSeam™ RPF and Wood Nailer – Roof to Roof 141 kB
E-04 Expansion Joint (Field Fabricated) with QuickSeam™ Splice Tape and Wood Nailer – Roof to Roof 134 kB
E-05 RubberGard™ EPDM Expansion Joint (Field Fabricated) with QuickSeam™ RPF Roof to Roof 137 kB
E-06 Expansion Joint (Field Fabricated) with QuickSeam™ Splice Tape – Roof to Roof 134 kB
E-07 Expansion Joint (Manufactured Cover) with QuickSeam™ RPF 133 kB
E-08 Expansion Joint (Manufactured Cover) with QuickSeam™ Splice Tape 131 kB
E-09 Expansion Joint (Field Fabricated) with QuickSeam™ RPF Curb to Curb 165 kB
E-10 RubberGard EPDM Expansion Joint (Field Fabricated) with QuickSeam™ Splice Tape – Curb to Curb 160 kB
E-11 Expansion Joint with Slip Plate – Roof to Wall 97 kB
E-12 Expansion Joint with Slip Plate – Roof to Roof 77 kB
LS-01 Lap Splice 109 kB
LS-02 Lap Splice with QuickSeam™ Splice Tape Overlap and QuickSeam T-Joint Cover 105 kB
LS-03 Lap Splice with Headlap Under Field Seam Using QuickSeam™ T-Joint Cover 110 kB
LS-04 Lap Splice with Headlap Over Field Seam Using QuickSeam™ T-Joint Cover 104 kB
LS-04A Lap Splice with Headlap Over Field Seam Using QuickSeam™ T-Joint Cover – Installation Steps 110 kB
LS-05 Lap Splice with Headlap Over Field Seam using 5″ QuickSeam™ Flashing 95 kB
LS-06 Lap Splice with Headlap Under Curb or Wall Flashing Using QuickSeam™ T-Joint Cover 118 kB
LS-07 Lap Splice at Curb or Wall Flashing Using QuickSeam™ T-Joint Cover 120 kB
LS-08 Lap Splice at Field to Curb/Wall Flashing Transition using QuickSeam™ T-Joint Cover 110 kB
LS-09 Seam Edge Treatment Application 175 kB
LS-10 Lap Splice with 1″ Metal Batten and 6″ QuickSeam™ Splice Tape 108 kB
LS-11 Lap Splice with 3/4″ Polymer Batten and 6″ QuickSeam™ Splice Tape 109 kB
LS-12 Lap Splice with Firestone V-Plate and 6″ QuickSeam™ Splice Tape 108 kB
LS-13 Lap Splice at Expansion Joint Tube 138 kB
M-01 Firestone RubberGard QuickSeam™ Walkway Pad 121 kB
M-02 Concrete Walkway Paver 62 kB
M-04 Wood Sleeper 77 kB
M-05 Grease Catch Pan 110 kB
M-06 Lightning Rod 140 kB
MA-01 QuickSeam™ Batten Cover at “T” Perimeter 85 kB
MA-02 QuickSeam™ Batten Cover at Corner 85 kB
MA-03 QuickSeam™ Batten Cover Strip at End Lap 109 kB
MA-04 QuickSeam™ Batten Cover at Field Seams 115 kB
MA-05 Fully Adhered Perimeter Tie-In Option 84 kB
MA-06 QuickSeam™ R.M.A. Strip at “T” Perimeter 148 kB
MA-07 QuickSeam™ R.M.A. Strip at Corner 133 kB
MA-08 QuickSeam™ Batten Cover 73 kB
MA-09 X-Tred Walkway Pad 111 kB
P-01 Penetration with QuickSeam™ Pipe Flashing 132 kB
P-02 Penetration with QuickSeam™ Conduit Flashing 133 kB
P-03 Penetration with Field Fabricated Flashing 108 kB
P-04 Penetration (Hot Stack) with Field Fabricated Flashing 109 kB
P-05 Penetration with QS6 Penetration Pocket 209 kB
P-06 Penetration with Field Fabricated Round PVC Penetration Pocket 224 kB
P-07 Penetration with Metal Penetration Pocket to Nailer 212 kB
P-08 Penetration with Metal Penetration Pocket to Deck 216 kB
P-09 Penetration with Metal Penetration Pocket to Nailer for Recover or Reroof 218 kB
P-10 Membrane Securement at Penetration with 2″ Metal Plates and T-Joint Covers 77 kB
P-11 Membrane Securement at Penetration with 2″ Metal Plates and Target Patch 86 kB
P-12 Membrane Securement at Penetration with Batten and QuickSeam™ Batten Cover 90 kB
R-01 QuickSeam™ Batten Cover at “T” Perimeter 97 kB
R-02 QuickSeam™ Batten Cover at End Lap 97 kB
R-03 QuickSeam™ Batten Cover at Field Seam 104 kB
R-04 Fully Adhered Perimeter Tie-In Option 96 kB
R-05 Mechanically Attached Perimeter 109 kB
R-06 Mas Perimeter using R.M.A. Strip 110 kB
R-07 QuickSeam™ R.M.A. Strip Layout 111 kB
R-08 QuickSeam™ Batten Cover 74 kB
RE-01 Roof Edge with AnchorGard Standard 90 kB
RE-02 Roof Edge with AnchorGard Standard and QuickSeam™ RPF Strip 115 kB
RE-03 Roof Edge with AnchorGard Ballasted 97 kB
RE-04 Roof Edge with AnchorGard Fascia and Firestone Ballast Paver 105 kB
RE-05 Roof Edge with AnchorGard Extended Face 98 kB
RE-07 Roof Edge with Firestone EdgeGard + 93 kB
RE-08 Roof Edge with Firestone EdgeGard + and QuickSeam™ RPF Strip 102 kB
RE-09 Roof Edge with Firestone EdgeGard + 110 kB
RE-10 Roof Edge with Firestone EdgeGard 94 kB
RE-11 Roof Edge with Firestone EdgeGard and QuickSeam™ RPF Strip 102 kB
RE-12 Roof Edge with Firestone EdgeGard 110 kB
RE-13 Roof Edge Gutter with Firestone Drain Bar 135 kB
RE-14 Roof Edge Gutter with Firestone Drain Bar and QuickSeam™ RPF Strip 134 kB
RE-15 Roof Edge Gutter with Slotted Drain Bar 128 kB
RE-16 Roof Edge Gutter with Slotted Drain Bar and QuickSeam™ RPF Strip 136 kB
RE-17 Roof Edge Gutter with Flange 159 kB
RE-19 Roof Edge with Firestone Drain Bar 127 kB
RE-20 Roof Edge with Firestone Drain Bar and QuickSeam™ RPF Strip 128 kB
RE-21 Roof Edge with Slotted Drain Bar 119 kB
RE-22 Roof Edge with Slotted Drain Bar and QuickSeam™ RPF Strip 125 kB
RE-23 Roof Edge with Fascia Metal by Others 171 kB
RE-23A Roof Edge with Firetone Una-Edge DE (Drip Edge) 162 kB
RE-23B Roof Edge with Firestone Una-Edge GS (Gravel Stop) 163 kB
RE-24 Roof Edge with Fascia Metal by Others 141 kB
RE-24A UNA-EDGE DripEdge (DE) 152 kB
RE-24B UNA-EDGE GravelStop (GS) 155 kB
RE-25 Roof Edge with QuickSeam™ Flashing End Splice Overlap 140 kB
RE-26 Roof Edge Corner with QuickSeam™ Flashing and T-Joint Cover 111 kB
RE-27 Roof Edge with QuickSeam™ Flashing at Field Seam 37 kB
RE-28 RubberGard EPDM Roof Edge Splice with QuickSeam™ Flashing Cove 112 kB
S-01 Thru-Wall Scupper (Welded Sleeve) 146 kB
S-01A Thru-Wall Scupper (Welded Sleeve) Installation Steps 1 & 2 140 kB
S-01B Thru-Wall Scupper (Welded Sleeve) Installation Steps 3 & 4 119 kB
S-02 Overflow Thru-Wall Scupper (Welded Sleeve) 118 kB
S-02A Overflow Thru-Wall Scupper (Welded Sleeve) Installation Steps 1 & 2 133 kB
S-02B Overflow Thru-Wall Scupper (Welded Sleeve) Installation Steps 3 & 4 121 kB
S-03 Thru-Wall Scupper (Non-Welded Sleeve) 152 kB
S-03A Thru-Wall Scupper (Non-Welded Sleeve) Installation Steps 1 & 2 136 kB
S-03B Thru-Wall Scupper (Non-Welded Sleeve) Installation Steps 3 & 4 139 kB
S-03C Thru-Wall Scupper (Non-Welded Sleeve) Installation Step 5 82 kB
S-04 Overflow Thru-Wall Scupper (Non-Welded Sleeve) 122 kB
S-04A Overflow Thru-Wall Scupper (Non-Welded Sleeve) Installation Steps 1 & 2 126 kB
S-04B Overflow Thru-Wall Scupper (Non-Welded Sleeve) Installation Steps 3 & 4 135 kB
S-04C Overflow Thru-Wall Scupper (Non-Welded Sleeve) Installation Step 5 81 kB
T-01 Termination with Termination Bar 109 kB
T-02 Termination on Outside of Parapet Wall with Termination Bar 115 kB
T-03 Termination with Reglet Counterflashing 120 kB
T-04 Termination with Reglet Counterflashing and Termination Bar 142 kB
T-05 Termination with Surface Mounted Counterflashing 132 kB
T-06 Termination with Surface Mounted Counterflashing and Termination Bar 149 kB
T-07 Termination at EIFS or Wall Cladding 108 kB
T-08 Termination with Bar – Elevation Change 79 kB
T-09 Termination at Tilt-Up Wall Joint 111 kB
T-10 Termination at Tilt-Up Wall Joint with Reglet Counterflashing 137 kB
T-11 Termination at Top of Wall with Coping Stone 195 kB
T-12 Termination at Top of Wall with Firestone Coping 113 kB
T-12A Termination Top of Wall with UNA-EDGE Coping 107 kB
T-13 Termination at Top of Wall with Firestone AnchorGard Standard 93 kB
T-14 Termination at R.T.U. (Unit Flange Above Membrane) 118 kB
T-15 Termination at R.T.U. with Counterflashing (Unit Flange Above Membrane) 155 kB
T-16 Termination At R.T.U. with QuickSeam™ RPF (Unit Flange Mounted to Substrate) 115 kB
T-17 Termination at R.T.U. with QuickSeam RPF™ and Counterflashing (Unit Flange Mounted to Substrate) 155 kB
T-18 Termination at R.T.U. with QuickSeam™ Splice Tape (Unit Flange Mounted to Substrate) 128 kB
T-19 Termination at R.T.U. with QuickSeam™ Splice Tape and Counterflashing (Unit Flange Mounted to Substrate) 167 kB
T-20 Termination at Shingles 120 kB
T-21 Termination at Metal Roof Panel 114 kB
T-22 Intermediate Wall Flashing Attachment with QuickSeam™ Splice Tape and Batten Strip 110 kB
T-23 Intermediate Wall Flashing Attachment with QuickSeam™ Batten Cover 111 kB
File Name Size Download
Albo Manufacturing, Firestone’s First RubberGard EPDM Roof, Case Study – Item 1898 2 MB
EPDM Adhesive/Primer Matrix 1 MB
EPDM Family Brochure – Item 1136 7 MB
RubberGard™ EPDM Accessories Brochure – Item 1279 4 MB
File Name Size Download
AG MBR RubberGard™ EPDM Metal Building Recover 343 kB
AG QuickSeam Batten Cover Strip Application Guide 78 kB
AG QuickSeam™ Flashing & QuickSeam FormFlash™ Application Guide 403 kB
AG RubberGard™ EPDM Application Guide 410 kB
AG RubberGard™ EPDM SA Application Guide 94 kB
QS-EPDM-100 RubberGard EPDM, FA, Concrete 5-20 YR 64 kB
QS-EPDM-102 RubberGard EPDM, FA, Concrete 30 YR 262 kB
QS-EPDM-103 RubberGard EPDM, FA, Wood 5-20 YR 62 kB
QS-EPDM-104 RubberGard EPDM, FA, Wood 25 YR 105 kB
QS-EPDM-105 RubberGard EPDM, FA, Wood 30 YR 340 kB
QS-EPDM-107 RubberGard EPDM, FA, Steel 25 YR 279 kB
QS-EPDM-108 RubberGard EPDM, FA, Steel 30 YR 279 kB
QS-EPDM-109 RubberGard EPDM, FA, LtWt Concrete 5-20 YR 64 kB
QS-EPDM-110 RubberGard EPDM, FA, LtWt Concrete 25 YR 229 kB
QS-EPDM-111 RubberGard EPDM, FA, LtWt Concrete 30 YR 337 kB
QS-EPDM-115 RubberGard EPDM, MAS, Concrete 5-20 YR 227 kB
QS-EPDM-116 RubberGard EPDM, MAS, Concrete 25 YR 227 kB
QS-EPDM-117 RubberGard EPDM, MAS, Wood 5-20 YR 84 kB
QS-EPDM-118 RubberGard EPDM, MAS, Wood 25 YR 66 kB
QS-EPDM-119 RubberGard EPDM, MAS, Steel 5-20 YR 105 kB
QS-EPDM-120 RubberGard EPDM, MAS, Steel 25 YR 105 kB
QS-EPDM-121 RubberGard EPDM, Ballast, Various 5-20 YR 123 kB
QuickSeam Corner Flashing Application Instructions 39 kB
QuickSeam™ Curb Flashing for RubberGard™ Membrane Systems Application Instructions 39 kB
QuickSeam™ Penetration Pocket Kits Application Instructions 519 kB
QuickSeam™ RMA Strip Application Instructions 40 kB
QuickSeam™ Reinforced Perimeter Fastening Strip Application Instructions 29 kB
QuickSeam™ SA Flashing Application Instructions 43 kB
QuickSeam™ SA Patch for Conduit Flashing Application Instructions 37 kB
QuickSeam™ SA Patch for Pipe Flashing Application Instructions 37 kB
QuickSeam™ Seam Splice Tape Application Instructions 43 kB
QuickSeam™ T-Joint Cover Application Instructions 27 kB
RubberGard EPDM B-7-2F Model 57 kB
RubberGard EPDM B-7-4F Model 58 kB
RubberGard EPDM B-9-2F Model 57 kB
RubberGard EPDM B-9-4F Model 58 kB
RubberGard EPDM B-10-2F Model 57 kB
RubberGard EPDM B-10-4F Model 58 kB
RubberGard EPDM M-7-2F Model 42 kB
RubberGard EPDM M-7-4F Model 42 kB
RubberGard EPDM M-9-2F Model 41 kB
RubberGard EPDM M-9-4F Model 42 kB
RubberGard EPDM M-10-2F Model 41 kB
RubberGard EPDM M-10-4F Model 42 kB
RubberGard EPDM R-7-2F Model 57 kB
RubberGard EPDM R-7-4F Model 58 kB
RubberGard EPDM R-10-2F Model 57 kB
RubberGard EPDM R-10-4F Model 58 kB
V-Force™ Application Instructions 308 kB
File Name Size Download
18″ QuickSeam SA Flashing – SDS 260 kB
AP Sealant – SDS 1 MB
AcryliTop™ Base Coat for EPDM – SDS 476 kB
EPDM Bonding Adhesive BA-2004(T) – SDS 529 kB
EPDM Solvent-Free Bonding Adhesive – SDS 596 kB
FillGard™ M Pourable Sealer Part A – SDS 498 kB
FillGard™ M Pourable Sealer Part B – SDS 315 kB
Lap Sealant HS – SDS 660 kB
Modular Water-Based Bonding Adhesive WBA-3781 – SDS 245 kB
Polymer Fasteners Batten Strips – SDS 141 kB
QuickPrime Plus Primer – SDS 582 kB
QuickPrime™ Plus LVOC – SDS 725 kB
QuickSeam Reinforced Perimeter Strip – SDS 31 kB
QuickSeam™ Batten Cover – SDS 260 kB
QuickSeam™ Conduit Flashing – SDS 260 kB
QuickSeam™ Corner Flashing – SDS 260 kB
QuickSeam™ Curb Flashing – SDS 260 kB
QuickSeam™ EPDM Accessories – SDS 260 kB
QuickSeam™ FormFlash Flashing – SDS 260 kB
QuickSeam™ Joint Cover – SDS 260 kB
QuickSeam™ Penetration Pocket Kit, QS6 & QS10 – SDS 260 kB
QuickSeam™ R.M.A. Strip – SDS 260 kB
QuickSeam™ Reinforced Perimeter Fastening Strip (RPF) – SDS 260 kB
QuickSeam™ SA Patch for Conduit Flashing – SDS 260 kB
QuickSeam™ SA Patch for Pipe Flashing – SDS 260 kB
QuickSeam™ Splice Tape – SDS 308 kB
QuickSeam™ Universal Pipe Flashing – SDS 260 kB
QuickSeam™ Walkway Pad – SDS 260 kB
RubberGard EPDM Pipe Flashing – SDS 106 kB
RubberGard™ EPDM FormFlash™ Flashing – SDS 321 kB
RubberGard™ EPDM Pipe Flashing – SDS 321 kB
RubberGard™ EPDM SA Membrane with Secure Bond™ Technology – SDS 305 kB
RubberGard™ LSFR PT Pre Applied Tape Panels – SDS 319 kB
Single-Ply LVOC Bonding Adhesive – 1168 – SDS 373 kB
Single-Ply LVOC Bonding Adhesive – SDS 1 MB
Single-Ply LVOC Primer – SDS 1,018 kB
Single-Ply LVOC Splice Wash Cleaner – SDS 487 kB
Splice Adhesive SA-1065 – SDS 498 kB
Splice Adhesive SA-1065-2009 – SDS 35 kB
Splice Wash SW-100 Cleaner – SDS 532 kB
Water Based Bonding Adhesive P – SDS 746 kB
File Name Size Download
2” Metal Seam Plate – TIS 1101 335 kB
18″ QuickSeam™ SA Flashing – TIS 1421 408 kB
AP Sealant – TIS 1305 90 kB
All-Purpose Fasteners – TIS 1001 231 kB
Aluminum Drain Bar – TIS 1206 299 kB
Coated Drive Pin Fastener – TIS 1008 414 kB
Coiled Metal Batten Strip – TIS 1201 314 kB
Concrete Drive Fasteners – TIS 1005 93 kB
EPDM Bonding Adhesive BA-2004 – TIS 817 91 kB
EcoWhite™ Platinum EPDM Membrane – TIS 113 119 kB
FillGard™ M Pourable Sealant – TIS 1315 110 kB
Heavy Duty (HD) HailGard™ Fastener – TIS 1019 90 kB
Heavy Duty Fastener – TIS 1002 152 kB
Heavy Duty Plus Fastener – TIS 1009 103 kB
Insulation Fastening Plate – TIS 1106 124 kB
Membrane PreWash – TIS 1603 78 kB
Metal Batten Strip – TIS 1202 342 kB
Polymer Batten Strip – TIS 1207 576 kB
Polymer Fastener – TIS 1006 467 kB
Polymer Fastener Insulation Plate – TIS 1107 125 kB
Polymer Fastener Metal Batten Strip – TIS 1204 358 kB
Polymer Fastener Plate – TIS 1102 125 kB
Pourable Sealer A-10 (Part A & Part B) – TIS 1303 106 kB
Pre-Assembled #12 Fastener and Plate – TIS 1003 155 kB
Pre-Assembled Heavy-Duty Fastener and Insulation Plate – TIS 1004 499 kB
Purlin Fastener Black E-Coated – TIS 1011 227 kB
QuickPrime™ Plus – TIS 1411 550 kB
QuickPrime™ Plus LVOC – TIS 1412 399 kB
QuickRoller™ – TIS 1419 533 kB
QuickScrubber™ Plus Primer Application System – TIS 1413 366 kB
QuickSeam™ Batten Cover – TIS 1404 111 kB
QuickSeam™ Conduit Flashing – TIS 1416 125 kB
QuickSeam™ Corner Flashing – TIS 1408 369 kB
QuickSeam™ Curb Flashing – TIS 1407 399 kB
QuickSeam™ Flashing – TIS 1402 417 kB
QuickSeam™ FormFlash – TIS 1405 408 kB
QuickSeam™ Joint Cover – TIS 1406 515 kB
QuickSeam™ Penetration Pocket Kits – TIS 1415 271 kB
QuickSeam™ Pipe Flashing – TIS 1409 431 kB
QuickSeam™ R.M.A. Strip – TIS 1414 425 kB
QuickSeam™ Reinforced Perimeter Fastening (RPF) Strip – TIS 1403 283 kB
QuickSeam™ SA For Pipe Flashing – TIS 1444 445 kB
QuickSeam™ SA Patch For Conduit Flashing – TIS 1443 438 kB
QuickSeam™ Splice Tape – TIS 1401 638 kB
QuickSeam™ Walkway Pad – TIS 1410 256 kB
QuickSeam™ Yellow Safety Strip – TIS 1446 87 kB
QuickTaper™ – TIS 1420 472 kB
RubberGard EPDM Solvent-Free Bonding Adhesive – TIS 830 124 kB
RubberGard™ EPDM Fire Retardant (FR) Membrane – TIS 102 543 kB
RubberGard™EPDM FormFlash™ – TIS 107 168 kB
RubberGard™ EPDM Reinforced Perimeter Fastening (RPF) Strip – TIS 108 251 kB
RubberGard™ EPDM SA Membrane – TIS 610 133 kB
RubberGard™ LSFR PT Pre-Applied Tape Panels – TIS 111 536 kB
RubberGard™ Non-Reinforced Low Slope Fire Retardant (LSFR) EPDM Membrane – TIS 103 531 kB
RubberGard™ Platinum EPDM Membrane – TIS 109 124 kB
RubberGard™ Platinum EPDM PT Membrane – TIS 117 458 kB
Single-Ply LVOC Bonding Adhesive-1168 – TIS 824 351 kB
Single-Ply QuickPrime™ Primer – TIS 1436 435 kB
Single Ply LVOC Splice Wash – TIS 826 342 kB
Splice Wash SW-100 – TIS 807 102 kB
TIS 106 RubberGard™ Neoprene Membrane 492 kB
TIS 1308 – Lap Sealant HS 334 kB
Termination Bar – TIS 1205 324 kB
UNA-Edge CO Coping System – TIS 2069 98 kB
V-Plate – TIS 1103 130 kB
Water Based Bonding Adhesive-P – TIS 816 422 kB
Water Block Seal (S-20) – TIS 1304 194 kB
X-Tred™ Walkway Pad – TIS 1526 276 kB
File Name Size Download
ESR-3026 Firestone RubberGard EPDM Single-Ply Roofing Membranes 430 kB
FL10284-R8 Firestone RubberGard EPDM Single Ply Roof Systems 1 MB
File Name Size Download
Sample RubberGard MAX Warranty 786 kB
Join Our Email List
Stay up-to-speed on all things Firestone Building Products.

Subscribe >
Find A Sales Rep

Please select your state to find the Firestone Building Products Sales Rep nearest to you.

Select a Sales Rep Type

Find >
Find A Contractor

Please select your state or zip code to find the Contractor or Installer nearest to you.

—— or ——

Find >