If you have a job that you would like considered for the project portfolio system please fill out and submit a Project Profile Submission Form.

Find A Sales Rep

Please select your state to find the Firestone Building Products Sales Rep nearest to you.

Select a Sales Rep Type

Find >
Find A Contractor

Please select your state or zip code to find the Contractor or Installer nearest to you.

—— or ——

Find >

Maple Hall

SEARCH


Maple Hall

Golden, Colorado

When the Colorado School of Mines needed to increase their capacity for freshmen housing, college officials decided to establish a new residential village at the south end of campus. Ascetically, the architect was directed to provide an evolution of existing materials in use on campus: stone, brick and metal panels.

H&L Architecture, who designed the project, also had the goal of obtaining LEED Silver certification for Maple Hall, for a residence hall with an exterior gross area of 97,655 square feet.

The installing contractor, Tecta America Colorado, LLC, installed Series 1200 metal wall panels in bright silver metallic, UC-501 wall panels in RHEINZINK pre-weathered blue gray, and covered the roof with Firestone UltraPly 60mil tan TPO and UC-3 roofing panels in RHEINZINK gray. An AnchorGard SP Edge System topped off the project, while a Red Shield Warranty will protect the roof for the next 20 years.

Firestone UC-501 panels were also used on the neighboring Brown Hall. Both Maple and Brown Halls were ready for students to occupy for the Fall 2011 semester.

File Name Size Download
3-E-01 UC-3 Sliding Eave at Drip Edge  24 kB
3-E-02 UC-3 Sliding Eave at Gutter  27 kB
3-E-03 UC-3 Cleated Sliding Eave at Drip Edge  26 kB
3-E-04 UC-3 Cleated Sliding Eave at Gutter 29 kB
3-EJ-01 UC-3 Expansion Joint 34 kB
3-EL-01 UC-3 END LAP  30 kB
3-HE-01 UC-3 Fixed High Eave With Z-Closure  34 kB
3-HE-02 UC-3 Fixed High Eave With Modified J-Channel  37 kB
3-HW-01 UC-3 Fixed HeadWall With Z-Closure at Reglet  49 kB
3-HW-02 UC-3 Fixed HeadWall With Z-Closure at Wall Panel  29 kB
3-HW-03 UC-3 Fixed HeadWall With Modified J-Channel at Reglet  52 kB
3-HW-04 UC-3 Fixed HeadWall With Modified J-Channel at Wall Panel  33 kB
3-P-01 UC-3 Penetration With Pipe Flashing  45 kB
3-P-02A UC-3 Curb – High and Low Side Detail  39 kB
3-P-02B UC-3 Curb – Rake Detail  23 kB
3-PB-01 UC-3 Pitchbreak Transition at Roof Edge  40 kB
3-PB-02 UC-3 Pitchbreak Transition – Steep to Low Slope  38 kB
3-PB-03 UC-3 Pitchbreak Transition- Low to Steep Slope 37 kB
3-R-01 UC-3 Fixed Hip or Ridge With Z-Closure  34 kB
3-R-02 UC-3 Fixed Hip or Ridge With Modified J-Channel  36 kB
3-R-03 UC-3 Ridge / Hip Cap Splice  57 kB
3-R-04 UC-3 Copper Fixed Hip or Ridge with Stainless Steel Cleat  35 kB
3-R-05 UC-3 Vented Fixed hip or Ridge with Z-Closure  38 kB
3-RK-01 UC-3 Rake With Hemmed Panel Edge  25 kB
3-RK-02 UC-3 Rake With Modified J-Channel  26 kB
3-RK-03 UC-3 Rake With J-Cleat  22 kB
3-RK-04 UC-3 Radiused Rake With Hemmed Panel Edge 29 kB
3-SG-01 UC-3 Continuous SnowGard  19 kB
3-SW-01 UC-3 Side Wall Flashing With Modified J-Channel at Reglet  45 kB
3-SW-02 UC-3 Side Wall Flashing With Mod J-Channel at Panel  27 kB
3-SW-04 UC-3 RADIUSED SIDEWALL FLASHING WITH J-CLEAT 41 kB
3-TR-01 UC-3 EPDM to Metal Roof System Transition  30 kB
3-V-01 UC-3 Valley With Continuous Cleat 37 kB
3-V-03 UC-3 Valley at Rake Wall  56 kB
ARC-02 Concave Panels 38 kB
F-1 UC-501 Wrapped Fascia with Recessed Soffit 117 kB
F-2 UC-501 Wrapped Fascia with Flush Soffit 120 kB
F-3 UC-501 Wrapped Fascia with Flush Soffit Over Hat Channels 125 kB
F-4 UC-501 Finished Fascia with Recessed Soffit 128 kB
F-5 UC-501 Fascia Panel to Soffit Panel Transition 131 kB
F-6 UC-501 Fascia Panel to Soffit Transition Over Hat Channels 150 kB
J-1 UC-501 Soffit Joint 119 kB
J-2 UC-501 Soffit Joint Over Hat Channels 128 kB
S-1 UC-501 Soffit Panel at Mitered Corner 128 kB
UT-BT-01 Base Tie-In with HD Seam Plates Fastened to Deck  112 kB
UT-BT-02 Base Tie-In with HD Seam Plates Fastened to Wall/Curb  106 kB
UT-BT-03 Base Tie-In with QuickSeam RPF and 2″ Metal Plates Fastened to Deck  114 kB
UT-BT-04 Base Tie-In with QuickSeam RPF and 2″ Metal Plates Fastened to Wall/Curb  107 kB
UT-BT-05 Base Tie-In with HD Seam Plates – Deck Obstruction  112 kB
UT-BT-06 Base Tie-In with QuickSeam RPF and 2″ Metal Plates – Deck Obstruction  114 kB
UT-BT-07 Base Tie-In at Curb/Parapet with Existing Cant  120 kB
UT-BT-08 Base Tie-In with UltraPly TPO Coated Metal (with Brake)  115 kB
UT-BT-09 UltraPly TPO Coated Metal (with Brake) Splice  124 kB
UT-BT-09A UltraPly TPO Coated Metal (with Brake) Splice Installation Steps 1 & 2  101 kB
UT-BT-09B UltraPly TPO Coated Metal (with Brake) Splice Installation Steps 3 & 4  97 kB
UT-BT-10 Base Tie-In with UltraPly TPO Coated Metal  112 kB
UT-BT-11A UltraPly TPO Coated Metal Splice Installation Steps 1 & 2  100 kB
UT-BT-11B UltraPly TPO Coated Metal Splice Installation Steps 3 & 4  97 kB
UT-BT-11 UltraPly TPO Coated Metal Splice  121 kB
UT-BT-12 Base Tie-In at Welded Watertight Curb (Flanges Under 2″)  120 kB
UT-BT-13 Base Tie-In at Welded Watertight Curb (Flanges 2″-3″)  123 kB
UT-BT-14 QuickSeam RPF Layout at Outside Corner  250 kB
UT-BT-15 QuickSeam RPF Layout at Inside Corner  230 kB
UT-BT-16 Membrane Securement at Outside Corner  105 kB
UT-BT-17 Membrane Securement at Inside Corner  100 kB
UT-BT-18 Tie-In UltraPly TPO System to Existing Thermoplastic System (Monolithic Substrate)  147 kB
UT-BT-19 Tie-In UltraPly TPO System to Existing Thermoplastic System (Non-Monolithic Substrate) 149 kB
UT-BT-20 Tie-In UltraPly TPO System to Existing EPDM System (Monolithic Substrate)  158 kB
UT-BT-21 Tie-In UltraPly TPO System to Existing EPDM System (Non-Monolithic Substrate)  228 kB
UT-BT-22 Tie-In UltraPly TPO System to Existing Asphalt System (Monolithic Substrate)  165 kB
UT-BT-23 Tie-In UltraPly TPO System to Existing Asphalt System (Non-Monolithic Substrate)  163 kB
UT-BT-24 Tie-In with Metal Roof Deck  99 kB
UT-BT-25 Base Tie-In with UltraPly TPO QuickSeam RPF and HD Seam Plates Fastened to Deck  103 kB
UT-BT-26 Base Tie-In With UltraPly TPO QuickSeam RPF and HD Seam Plates Fastened to Wall / Curb  97 kB
UT-BT-27 UltraPly TPO 9.5″ QuickSeam Flashing  79 kB
UT-BT-28 UltraPly TPO 8″ Cover Strip  81 kB
UT-BT-29 UltraPly TPO Cover Strip at “T” Perimeter  104 kB
UT-BT-30 QuickSeam TPO Flashing at “T” Perimeter 102 kB
UT-C-01 Outside Corner  93 kB
UT-C-01A Outside Corner 95 kB
UT-C-02 Outside Corner at Welded Watertight Curb (Flanges Under 2″)  105 kB
UT-C-02A Outside Corner at Welded Watertight Curb (Flanges Under 2″) Installation Steps 1 & 2  95 kB
UT-C-02B Outside Corner at Welded Watertight Curb (Flanges Under 2″) Installation Steps 3 & 4  103 kB
UT-C-03 Outside Corner at Welded Watertight Curb (Flanges 2″-3″)  102 kB
UT-C-03A Outside Corner at Welded Watertight Curb (Flanges 2″-3″) Installation Steps 1 & 2  102 kB
UT-C-03B Outside Corner at Welded Watertight Curb (Flanges 2″-3″) Installation Steps 3 & 4  103 kB
UT-C-04 Inside Corner with Continuous Wall Flashing  111 kB
UT-C-05 Inside Corner  84 kB
UT-C-05A Inside Corner 90 kB
UT-C-06 Outside Corner with UltraPly TPO Coated Metal (with Brake)  104 kB
UT-C-06A Outside Corner with UltraPly TPO Coated Metal (with Brake) Installation Steps  102 kB
UT-C-07 Outside Corner with UltraPly TPO Coated Metal  102 kB
UT-C-07A Outside Corner with UltraPly TPO Coated Metal Installation Steps  105 kB
UT-C-08 Inside Corner with UltraPly TPO Coated Metal (with Brake)  119 kB
UT-C-08A Inside Corner with UltraPly TPO Coated Metal (with Brake) Installation Steps 1 & 2  88 kB
UT-C-08B Inside Corner with UltraPly TPO Coated Metal (with Brake) Installation Steps 3 & 4  91 kB
UT-C-09 Inside Corner with UltraPly TPO Coated Metal  115 kB
UT-C-09A Inside Corner with UltraPly TPO Coated Metal Installation Steps  111 kB
UT-C-10 Curb Flashing With Pre-Fabricated Curb Corners  149 kB
UT-C-11 Curb with UltraPly TPO Custom Curb Flashing 165 kB
UT-D-01 Roof Drain  136 kB
UT-D-02 Overflow Roof Drain with Water Dam 124 kB
UT-D-03 Firestone Drain Insert  157 kB
UT-D-04 Roof Drain with Overflow Roof Drain 152 kB
UT-E-01 Expansion Joint (Field Fabricated) with QuickSeam RPF – Roof to Wall  141 kB
UT-E-02 Expansion Joint (Field Fabricated) with Welded Splice – Roof to Wall  139 kB
UT-E-03 Expansion Joint (Field Fabricated) with QuickSeam RPF and Wood Nailer – Roof to Roof  134 kB
UT-E-04 Expansion Joint (Field Fabricated) with Welded Splice and Wood Nailer – Roof to Roof  128 kB
UT-E-05 Expansion Joint (Field Fabricated) with QuickSeam RPF – Roof to Roof  133 kB
UT-E-06 Expansion Joint (Field Fabricated) with Welded Splice – Roof to Roof  134 kB
UT-E-07 Expansion Joint (Manufactured Cover) with QuickSeam RPF  134 kB
UT-E-08 Expansion Joint (Manufactured Cover) with Welded Splice 129 kB
UT-E-09 Expansion Joint (Field Fabricated) with QuickSeam RPF – Curb to Curb  159 kB
UT-E-10 Expansion Joint (Field Fabricated) with Welded Splice – Curb to Curb  140 kB
UT-E-11 Expansion Joint with Slip Plate – Roof to Wall  117 kB
UT-E-12 Expansion Joint with Slip Plate – Roof to Roof  76 kB
UT-LS-01 Lap Splice with 1-1/2″ Automatic Welder  82 kB
UT-LS-03 Lap Splice with 5″ Continuous Wide Weld  83 kB
UT-LS-04 Lap Splice Fastener Layout for Standard Weld Seam  82 kB
UT-LS-05 Lap Splice Fastener Layout for Wide Weld Seam  85 kB
UT-LS-06 Lap Splice with Headlap Under Field Seam Using T-Joint Cover  91 kB
UT-LS-07 Lap Splice with Headlap Under Field Seam Using TPO QuickSeam “T” Joint  108 kB
UT-LS-08 Lap Splice with Headlap Over Field Seam Using T-Joint Cover  89 kB
UT-LS-09 Lap Splice with Headlap Over Field Seam Using TPO QuickSeam “T” Joint  106 kB
UT-LS-10 Lap Splice with Headlap Under Curb or Wall Flashing using T-Joint Cover  102 kB
UT-LS-11 Lap Splice with Headlap Under Curb or Wall Flashing using TPO QuickSeam Flashing  119 kB
UT-LS-12 Lap Splice at Curb or Wall Flashing using T-Joint Cover  112 kB
UT-LS-13 Lap Splice at Field to Curb/Wall Flashing Transition using T-Joint Cover  99 kB
UT-LS-14 Cut Edge Treatment Application  77 kB
UT-LS-15 Lap Splice at Expansion Joint Tube  123 kB
UT-M-01 Walkway Pad  147 kB
UT-M-02 Concrete Walkway Paver  60 kB
UT-M-04 Wood Sleeper  76 kB
UT-M-05 Grease Catch Pan  121 kB
UT-M-06 Lightning Rod  120 kB
UT-M-07 X-Tred Walkway Pad 110 kB
UT-P-01 Penetration with UltraPly TPO Large Pipe Flashing  148 kB
UT-P-02 Penetration with UltraPly TPO Small Pipe Flashing  149 kB
UT-P-03 Penetration with QuickSeam Pipe Flashing  157 kB
UT-P-04 Penetration with UltraPly TPO Flashing (Unsupported)  138 kB
UT-P-05 Penetration with UltraPly TPO Membrane  133 kB
UT-P-06 Penetration (Hot Stack) with UltraPly TPO Flashing (Unsupported)  141 kB
UT-P-07 Penetration (Hot Stack) with UltraPly TPO Membrane  139 kB
UT-P-08 Penetration with TPO Penetration Pocket Kit  214 kB
UT-P-09 Penetration with QS6 Penetration Pocket  214 kB
UT-P-10 Penetration with Field Fabricated Round PVC Penetration Pocket  221 kB
UT-P-11 Penetration with UltraPly TPO Coated Metal Penetration Pocket to Nailer  207 kB
UT-P-12 Penetration with Metal Penetration Pocket to Nailer  209 kB
UT-P-13 Penetration with Metal Penetration Pocket to Deck  212 kB
UT-P-14 Penetration with Metal Penetration Pocket to Nailer for Recover or Reroof  214 kB
UT-P-15 Membrane Securement at Penetration with HD Seam Plates & Target Patch  75 kB
UT-P-16 Membrane Securement at Penetration with HD Seam Plates & Cover Strips  95 kB
UT-P-17 Penetration With UltraPly TPO QuickSeam Pipe Flashing  159 kB
UT-P-18 Square Penetration with Sqaure UltraPly TPO Custom Pipe Boot  157 kB
UT-P-19 Round Penetration with Conical UltraPly TPO Custom Pipe Boot  128 kB
UT-P-20 Round Penetration with Round UltraPly TPO Custom Pipe Boot  110 kB
UT-P-21 Round Penetration with UltraPly Split Pipe Boot 154 kB
UT-PE-3 QuickSeam Flashing w/Plates & Fasteners at Perimeter Enhancement 116 kB
UT-RE-01 Roof Edge with AnchorGard Standard  89 kB
UT-RE-02 Roof Edge with AnchorGard Standard and QuickSeam RPF Strip  113 kB
UT-RE-03 Roof Edge with AnchorGard Ballasted  93 kB
UT-RE-04 Roof Edge with AnchorGard Fascia and Firestone Ballast Paver  102 kB
UT-RE-05 Roof Edge with AnchorGard Extended Face  96 kB
UT-RE-06 Roof Edge with AnchorGard Extended Face and QuickSeam RPF Strip  121 kB
UT-RE-07 Roof Edge with Firestone EdgeGard +  92 kB
UT-RE-08 Roof Edge with Firestone EdgeGard + and QuickSeam RPF Strip  102 kB
UT-RE-09 Roof Edge with Firestone EdgeGard +  116 kB
UT-RE-10 Roof Edge with Firestone EdgeGard  94 kB
UT-RE-11 Roof Edge with Firestone EdgeGard and QuickSeam RPF Strip  102 kB
UT-RE-12 Roof Edge with Firestone EdgeGard  116 kB
UT-RE-13 Roof Edge Gutter with Firestone Drain Bar  131 kB
UT-RE-14 Roof Edge Gutter with Slotted Drain Bar  126 kB
UT-RE-15 Roof Edge Gutter with Flange  163 kB
UT-RE-16 Roof Edge Gutter with Flange  152 kB
UT-RE-17 Roof Edge Gutter with UltraPly TPO Coated Metal  124 kB
UT-RE-18 Roof Edge with Firestone Drain Bar  135 kB
UT-RE-19 Roof Edge with Slotted Drain Bar 118 kB
UT-RE-19A Roof Edge with UNA-EDGE Gravel Stop (GS)  147 kB
UT-RE-19B Roof Edge with UNA-EDGE Drip Edge (DE)  144 kB
UT-RE-20 Roof Edge with Fascia Metal by Others  170 kB
UT-RE-20A Roof Edge with Firestone UNA-EDGE DE (Drip Edge)  155 kB
UT-RE-20B Roof Edge with Firestone UNA-EDGE GS (Gravel Stop)  158 kB
UT-RE-21 Roof Edge with Fascia Metal by Others  155 kB
UT-RE-21A Roof Edge with Firestone UNA-EDGE DE (Drip Edge)  153 kB
UT-RE-21B Roof Edge with Firestone UNA-EDGE GS (Gravel Stop)  157 kB
UT-RE-22 Roof Edge with UltraPly TPO Coated Metal  126 kB
UT-RE-23 Roof Edge Splice with UltraPly TPO Coated Metal  151 kB
UT-RE-23A Roof Edge Splice with UltraPly TPO Coated Metal – Installation Steps 1&2 103 kB
UT-RE-23B Roof Edge Splice with UltraPly TPO Coated Metal – Installation Steps 3&4  94 kB
UT-RE-24 Roof Edge with TPO QuickSeam Flashing End Splice Overlap  118 kB
UT-RE-25 Roof Edge Corner with TPO QuickSeam Flashing  102 kB
UT-RE-26 Roof Edge with TPO QuickSeam Flashing at Field Seam  122 kB
UT-RE-27 Roof Edge Splice with TPO QuickSeam Flashing Cover  111 kB
UT-S-01 Thru-Wall Scupper (Welded Sleeve)  141 kB
UT-S-01A Thru-Wall Scupper (Welded Sleeve) Installation Steps 1 & 2  140 kB
UT-S-01B Thru-Wall Scupper (Welded Sleeve) Installation Steps 3 & 4  116 kB
UT-S-02 Overflow Thru-Wall Scupper (Welded Sleeve)  114 kB
UT-S-02A Overflow Thru-Wall Scupper (Welded Sleeve) Installation Steps 1 & 2  134 kB
UT-S-02B Overflow Thru-Wall Scupper (Welded Sleeve) Installation Steps 3 & 4  118 kB
UT-S-03 Thru-Wall Scupper (Non-Welded Sleeve)  144 kB
UT-S-03A Thru-Wall Scupper (Non-Welded Sleeve) Installation Steps 1 & 2  130 kB
UT-S-03B Thru-Wall Scupper (Non-Welded Sleeve) Installation Steps 3 & 4  134 kB
UT-S-03C Thru-Wall Scupper (Non-Welded Sleeve) Installation Step 5  79 kB
UT-S-04 Overflow Thru-Wall Scupper (Non-Welded Sleeve)  116 kB
UT-S-04A Overflow Thru-Wall Scupper (Non-Welded Sleeve) Installation Steps 1 & 2  125 kB
UT-S-04B Overflow Thru-Wall Scupper (Non-Welded Sleeve) Installation Steps 3 & 4  131 kB
UT-S-04C Overflow Thru-Wall Scupper (Non-Welded Sleeve) Installation Step 5  79 kB
UT-S-05 Thru-Wall UltraPly TPO Coated Metal Scupper  150 kB
UT-S-05A Thru-Wall UltraPly TPO Coated Metal Scupper Installation Steps 1 & 2  125 kB
UT-S-05B Thru-Wall UltraPly TPO Coated Metal Scupper Installation Steps 3 & 4  119 kB
UT-S-06 Overflow Thru-Wall UltraPly TPO Coated Metal Scupper  121 kB
UT-S-06A Overflow Thru-Wall UltraPly TPO Coated Metal Scupper Installation Steps 1 & 2  127 kB
UT-S-06B Overflow Thru-Wall UltraPly TPO Coated Metal Scupper Installation Steps 3 & 4  114 kB
UT-T-01 Termination with Termination Bar  106 kB
UT-T-02 Termination on Outside of Parapet Wall with Termination Bar  111 kB
UT-T-03 Termination with Reglet Counterflashing  116 kB
UT-T-04 Termination with Reglet Counterflashing and Termination Bar  144 kB
UT-T-05 Termination with Surface Mounted Counterflashing  127 kB
UT-T-06 Termination with Surface Mounted Counterflashing and Termination Bar  153 kB
UT-T-07 Termination at EIFS or Wall Cladding  108 kB
UT-T-08 Termination with Bar – Elevation Change  83 kB
UT-T-09 Termination at Tilt-Up Wall Joint  117 kB
UT-T-10 Termination at Tilt-Up Wall Joint with Reglet Counterflashing  142 kB
UT-T-11 Termination at Top of Wall with Coping Stone  105 kB
UT-T-12A Termination at the top of wall with UNA-EDGE Coping  105 kB
UT-T-12 Termination at Top of Wall with Firestone Coping  110 kB
UT-T-13 Termination at Top of Wall with Firestone AnchorGard Standard 90 kB
UT-T-14 Termination at R.T.U. (Unit Flange Above Membrane)  119 kB
UT-T-15 Termination at R.T.U. with Counterflashing (Unit Flange Above Membrane)  159 kB
UT-T-16 Termination at R.T.U. with QuickSeam RPF (Unit Flange Mounted to Substrate) 111 kB
UT-T-17 Termination at R.T.U. with QuickSeam RPF and Counterflashing (Unit Flange Mounted to Subst.)  149 kB
UT-T-18 Termination at R.T.U. with Welded Splice (Unit Flange Mounted to Substrate)  110 kB
UT-T-19 Termination at R.T.U. with Welded Splice and Counterflashing (Unit Flange Mounted to Subst.)  149 kB
UT-T-20 Termination at Shingles  134 kB
UT-T-21 Termination at Metal Roof Panel  117 kB
UT-T-22 Intermediate Wall Flashing Attachment with Cover Strip  115 kB
UT-T-23 Intermediate Wall Flashing Attachment with Welded Splice  112 kB
UT-T-24 Intermediate Wall Flashing Attachment (Membrane Not Adhered to Wall/Curb) 105 kB
W-1 UC-501 Exterior Wall Termination 129 kB
W-2 UC-501 Exterior Wall Termination Over Hat Channels 133 kB
W-3 UC-501 Soffit Panel to Exterior Wall Termination 141 kB
W-4 UC-501 Soffit Panel to Exterior Wall Termination Over Hat Channels 142 kB
File Name Size Download
01 Firestone UltraPly TPO Infographic 3 MB
02 Firestone UltraPly TPO Brochure 2 MB
310th Space Wing Case Study – Item 1908 303 kB
Bridgestone’s Off-Road Radial Tire Facility Case Study – Item 1963 1 MB
Earth Rangers Case Study 333 kB
Huntsman Advanced Technology Center Case Study 1 MB
Judge Memorial High School Case Study – Item 1892 375 kB
Metal Color Selection Chart – Item 1185 143 kB
Metal Stocking Matrix – Item 0123 330 kB
Oldest TPO UltraPly™ Roof Case Study – Item 1934 6 MB
UNA-CLAD Metal Roofing Systems Brochure – Item 1181 2 MB
UltraPly TPO Products Brochure – Item 1165 4 MB
File Name Size Download
QS-METAL UC-3, Steel 5-20 YR 49 kB
QS-METAL UC-3, Steel 25-30 YR 49 kB
QS-METAL UC-3, Wood 5-20 YR 50 kB
QS-METAL UC-3, Wood 25-30 YR 49 kB
QS-METAL UC-3, Wood 25-30 YR 49 kB
QS-TPO-200 UltraPly TPO FA Concrete 5-20YR 225 kB
QS-TPO-201 UltraPly TPO FA Concrete 25YR 226 kB
QS-TPO-202 UltraPly TPO FA Concrete 30YR 226 kB
QS-TPO-203 UltraPly TPO FA Wood 5-20YR 226 kB
QS-TPO-204 UltraPly TPO FA Wood 25YR 228 kB
QS-TPO-205 UltraPly TPO FA Wood 30YR 228 kB
QS-TPO-206 UltraPly TPO FA Steel 5-20YR 174 kB
QS-TPO-207 UltraPly TPO FA Steel 25YR 230 kB
QS-TPO-208 UltraPly TPO FA Steel 30YR 186 kB
QS-TPO-209 UltraPly TPO FA LtWt Concrete 5-20YR 226 kB
QS-TPO-210 UltraPly TPO FA LtWt Concrete 25YR 228 kB
QS-TPO-211 UltraPly TPO FA LtWt Concrete 30YR 227 kB
QS-TPO-212 UltraPly TPO FA Gyp or Cem Wood Fiber 5-20YR 227 kB
QS-TPO-213 UltraPly TPO FA Gyp or Cem Wood Fiber 25YR 228 kB
QS-TPO-214 UltraPly TPO FA Gyp or Cem Wood Fiber 30YR 228 kB
QS-TPO-215 UltraPly TPO MAS Concrete 5-20YR 223 kB
QS-TPO-216 UltraPly TPO MAS Concrete 25YR 224 kB
QS-TPO-217 UltraPly TPO MAS Concrete 30YR 224 kB
QS-TPO-218 UltraPly TPO MAS Wood 5-20YR 223 kB
QS-TPO-219 UltraPly TPO MAS Wood 25YR 225 kB
QS-TPO-220 UltraPly TPO MAS Wood 30YR 225 kB
QS-TPO-221 UltraPly TPO MAS Steel 5-20YR 225 kB
QS-TPO-222 UltraPly TPO MAS Steel 25YR 227 kB
QS-TPO-223 UltraPly TPO MAS Steel 30YR 227 kB
QS-TPO-224 UltraPly TPO MAS LtWt Concrete 5-20YR 224 kB
QS-TPO-225 UltraPly TPO MAS LtWt Concrete 25YR 224 kB
QS-TPO-226 UltraPly TPO MAS LtWt Concrete 30YR 225 kB
UC-500 and UC-501 Design Considerations 499 kB
UC-500 and UC-501 Panel Design Considerations 404 kB
UC-501 Specification 88 kB
UltraPly TPO-96-1-06 34 kB
UltraPly TPO-96-2-06 35 kB
UltraPly TPO-96-112b Model 65 kB
UltraPly TPO-96-212b Model 68 kB
UltraPly TPO-120-2-06 35 kB
UltraPly TPO-120-4-06 74 kB
UltraPly TPO-120-212b Model 61 kB
UltraPly TPO-120-412b Model 71 kB
UltraPly TPO-148-2-06 104 kB
UltraPly TPO-148-2-12 121 kB
UltraPly TPO-148-4-06 116 kB
UltraPly TPO148-4-12 130 kB
V-Force™ Application Instructions 308 kB
File Name Size Download
AP Sealant – SDS 1 MB
I.S.O. Spray R Part B – SDS 441 kB
UltraPly QuickSeam RMA – SDS 28 kB
UltraPly TPO Bonding Adhesive – SDS 494 kB
UltraPly TPO Cut-Edge Sealant LVOC 997 kB
UltraPly TPO General Purpose Sealant – SDS 509 kB
UltraPly TPO Membrane – SDS 119 kB
UltraPly™ QuickSeam™ T-Joint Covers P 295 kB
UltraPly™ TPO Coated Metal – SDS 119 kB
UltraPly™ TPO Membrane & Flashing Series 320 kB
UltraPly™ TPO QuickSeam™ Flashing – SDS 295 kB
UltraPly™ TPO QuickSeam™ Flashing P 295 kB
UltraPly™ TPO QuickSeam™ Outside Corner – SDS 295 kB
UltraPly™ TPO QuickSeam™ Outside Corner P 295 kB
UltraPly™ TPO QuickSeam™ Pipe Boot – SDS 295 kB
UltraPly™ TPO QuickSeam™ Pipe Boot P 295 kB
UltraPly™ TPO QuickSeam™ RMA Strip – SDS 295 kB
UltraPly™ TPO QuickSeam™ RMA Strip P 295 kB
UltraPly™ TPO QuickSeam™ RPF Strip – SDS 295 kB
UltraPly™ TPO QuickSeam™ RPF Strip P 295 kB
UltraPly™ TPO QuickSeam™ T-Joint Patch – SDS 295 kB
File Name Size Download
AP Sealant – TIS 1305 104 kB
Acrylic Patching Cement – White – TIS 1611 97 kB
Acrylic Rust Inhibitive Metal Primer – TIS 1610 97 kB
All-Purpose Fasteners – TIS 1001 231 kB
Aluminum Drain Bar – TIS 1206 299 kB
Aluminum Roof Coating – TIS 1608 70 kB
Clear Skylight Coating – TIS 1614 272 kB
Coated Drive Pin Fastener – TIS 1008 414 kB
Concrete Drive Fasteners – TIS 1005 93 kB
Elastomeric Seam Tape – TIS 1612 61 kB
Heavy Duty Fastener – TIS 1002 152 kB
Heavy Duty Plus Fastener – TIS 1009 103 kB
Heavy Duty Seam Plate – TIS 1108 103 kB
Industrial Elastomeric Roof Coating – TIS 1607 70 kB
Insulation Fastening Plate – TIS 1106 124 kB
Polyester Fabric – TIS 1613 57 kB
Polymer Fastener – TIS 1006 467 kB
Polymer Fastener Insulation Plate – TIS 1107 125 kB
Pourable Sealer A-10 (Part A & Part B) – TIS 1303 106 kB
Pre-Assembled #12 Fastener and Plate – TIS 1003 155 kB
Pre-Assembled HD and HD Seam Plate – TIS 1018 416 kB
Pre-Assembled Heavy-Duty Fastener and Insulation Plate – TIS 1004 499 kB
Purlin Fastener Black E-Coated – TIS 1011 227 kB
QuickRoller™ – TIS 1419 533 kB
QuickSeam™ Yellow Safety Strip – TIS 1446 87 kB
Rust Inhibitive Metal Primer (Red) – TIS 1609 97 kB
Single-Ply LVOC Bonding Adhesive-1168 – TIS 824 351 kB
Single-Ply QuickPrime™ Primer – TIS 1436 435 kB
TPO 9.5″ QuickSeam™ Flashing – TIS 1434 106 kB
TPO QuickSeam™ Flashing – TIS 1417 102 kB
Termination Bar – TIS 1205 324 kB
UC-3 Expansion Clip – TIS 2054 35 kB
UC-3 Fixed Clip – TIS 2053 377 kB
UC-3 Standing Seam Panel for Architectural Metal Roofing – TIS 2003 75 kB
UC-3 Super Clip – TIS 2055 383 kB
UC-501 Reveal Flush Panel For Architectural Soffit & Fascia Systems – TIS 2013 314 kB
UNA-Clad™ #10 Fasteners – TIS 1023 501 kB
UNA-Clad™ #12 Fasteners – TIS 1024 474 kB
UNA-Clad™ #12 Purlin Drilling Fasteners – TIS 1025 440 kB
UltraPly™ QuickSeam™ Corner Flashing – TIS 1426 85 kB
UltraPly™ QuickSeam™ R.M.A. Strip – TIS 1422 439 kB
UltraPly™ QuickSeam™ Reinforced Perimeter Fastening (RPF) Strip – TIS 1423 430 kB
UltraPly™ QuickSeam™ T-Joint Patches- TIS 1425 417 kB
UltraPly™ TPO 8″ Reinforced Cover Strip – TIS 216 404 kB
UltraPly™ TPO 18″ Curb Flashing – TIS 208 59 kB
UltraPly™ TPO Custom Curb Flashing – TIS 218 510 kB
UltraPly™ TPO Custom Pipe Boots – TIS 217 360 kB
UltraPly™ TPO Cut Edge Sealant – TIS 1306 108 kB
UltraPly™ TPO Cut Edge Sealant LVOC – TIS 1317 221 kB
UltraPly™ TPO General Purpose Sealant – TIS 1307 89 kB
UltraPly™ TPO Inside/Outside Corner – TIS 205 175 kB
UltraPly™ TPO Large Pipe Flashing – TIS 204 92 kB
UltraPly™ TPO Membrane – TIS 201 102 kB
UltraPly™ TPO Penetration Pocket Kit – TIS 206 184 kB
UltraPly™ TPO Reinforced Split Pipe Boot – TIS 219 419 kB
UltraPly™ TPO T-Joint Cover – TIS 203 99 kB
UltraPly™ TPO Universal Pipe Boot – TIS 215 397 kB
UltraPly™ TPO Universal QuickSeam™ Pipe Flashing – TIS 1424 448 kB
UltraPly™ TPO Unsupported Flashing – TIS 202 105 kB
Water Based Bonding Adhesive-P – TIS 816 422 kB
Water Block Seal (S-20) – TIS 1304 194 kB
X-Tred™ Walkway Pad – TIS 1526 276 kB
File Name Size Download
ESR-3422 Firestone Metal Roofing Panels 617 kB
FL10264-R12 Firestone UltraPly TPO Single Ply Roof Systems 2 MB
FL16723-R2 Firestone UltraPly TPO Single Ply Roofing Systems 1 MB
FL 21045-R0 Firestone UltraPly TPO XR Over Modified Bitumen Base Sheet Roof Systems 7 MB
Firestone Building Products – Metal Code Approval Guide 639 kB
Firestone Building Products – UltraPly™ TPO Code Approval Guide 812 kB
File Name Size Download
Metal Color Selection Chart – Item 1185 143 kB